Hemi Metals, located in Hamilton, New Zealand, has built a solid reputation as a reliable manufacturer and supplier of 1035 Round Bars. These bars are celebrated for their impressive blend of strength, machinability, and toughness. With a commitment to strict metallurgical standards and precise dimensional accuracy, Hemi Metals guarantees that each 1035 bar delivers consistent performance for medium-duty engineering tasks. As a medium-carbon steel grade, 1035 is ideal for components that need moderate strength and enhanced wear resistance compared to low-carbon steels. Industries trust Hemi Metals for top-notch 1035 Round Bars used in automotive parts, machinery components, forging operations, and various fabrication projects that require dependable and cost-effective steel solutions.
The 1035 Round Bar is made up of about 0.32–0.38% carbon and 0.60–0.90% manganese, along with trace amounts of phosphorus, sulfur, and silicon. This medium-carbon makeup gives it greater strength and hardness than low-carbon grades while still allowing for good machinability. In terms of mechanical properties, 1035 boasts solid tensile strength, reliable toughness, and decent fatigue resistance. It responds well to heat treatments like quenching and tempering, which boost its hardness and wear resistance. The alloy performs consistently during machining and forming processes, making it a great choice for medium-stress components.
|
Element |
Content |
|---|---|
|
Carbon, C |
0.310 – 0.380 % |
|
Iron, Fe |
98.63 – 99.09 % |
|
Manganese, Mn |
0.60 – 0.90 % |
|
Phosphorous, P |
0.040 % |
|
Sulfur, S |
0.050 % |
|
Properties |
Metric |
Imperial |
|---|---|---|
|
Tensile strength, ultimate |
585 MPa |
84800 psi |
|
Tensile strength, yield |
370 MPa |
53700 psi |
|
Modulus of elasticity |
190-210 GPa |
29700-30458 ksi |
|
Bulk modulus (typical for steel) |
140 GPa |
20300 ksi |
|
Shear modulus (typical for steel) |
80 GPa |
11600 ksi |
|
Poissons ratio |
0.27-0.30 |
0.27-0.30 |
|
Elongation at break (in 50 mm) |
30% |
30% |
|
Reduction of area |
53% |
53% |
|
Hardness, Brinell |
183 |
183 |
|
Hardness, Knoop (converted from Brinell hardness) |
204 |
204 |
|
Hardness, Rockwell B (converted from Brinell hardness) |
89 |
89 |
|
Hardness, Vickers (converted from Brinell hardness) |
192 |
192 |
|
Machinability (based on AISI 1212 steel. as 100 machinability) |
65 |
65 |
| EN Name | EN Number | DIN | JIS | UNI | BS |
|---|---|---|---|---|---|
| C35 | 1.0501 | C35, CM35 | S35C | C35 | 970 070M36 |
1035 Round Bar is not recommended for cryogenic applications as it may become brittle at extremely low temperatures.
To choose the right 1035 Round Bar, consider factors like the required strength, machinability, and specific application needs, ensuring it aligns with your project’s requirements.
Yes, 1035 Round Bar is recyclable and can be reused in various applications.
You’ll find 1035 Round Bars utilized in a wide range of industries for components that need moderate strength, durability, and machinability. Typical applications include shafts, studs, pins, axles, crankshafts, connecting rods, levers, gears, and forged parts. This material is also commonly used in automotive components, agricultural machinery, industrial equipment, and general fabrication. Its capacity to undergo heat treatment makes it perfect for parts that face wear, impact, and cyclic loading. Fabricators often choose 1035 steel for its cost-effectiveness in medium-carbon components that strike a balance between strength and machinability.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Hemi Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Hamilton New Zealand
Copyright 2024 Hemi Metals. All rights reserved
